Radio On Message; Adjusting The Radio's Volume; Selecting A Radio Channel; Method 1 - Motorola GP-388R Manual

Radio On Message

At power up the radio will display a message
customised by your dealer, e.g.:
After this text has been displayed, the radio perform
a self test routine. On completion of a successful
self test the radio will display:
This may be a number or an alias and will be the
channel currently selected by the rotary channel
selector. Alternatively, if required the radio may
display a message customised by your dealer, e.g.
Note: If your radio fails the self test routine consult
your dealer.

Adjusting the Radio's Volume

• Turn the On-Off/Volume Control knob to adjust
the volume level.

Selecting a Radio Channel

Your radio offers up to 255 channels, however some
may not be programmed. Check with your dealer for
more information.
Before selecting a channel ensure your radio is in
channel mode.
Note: The rotary knob default is channel mode.
The keypad default is programmable and may
be set to channel mode.
There are two ways to enter channel mode:

Method 1

Press the Channel Mode direct access button, if

programmed by your dealer.

Method 2
c to enter Menu Mode
1
+ or e until:
2
c to select
3
4 Display shows e.g.:
Note: After a short period of inactivity the radio
returns to the IDLE STATE.
Once in channel mode, there are three ways to
select a channel:
Method 1
English
23