Table of Contents
Advertisement
Software Update
When hard drive fails
You are notified when a hard disk malfunctions.
When RAID group rebuilds
You are notified when the RAID group rebuilds.
When RAID group is full
You are notified when the user data of RAID group reaches 100%.
When RAID reconfiguration completes
You are notified when the reconfiguration of a RAID is complete.
When hardware monitor abnormal
You are notified when the hardware monitor is behaving abnormally.
When UPS power failed or restored
You are notified when UPS is connected and it detects a power failure and
when the power is restored after a power failure.
5
Click the "Submit" button.
A message appears indicating that the settings are complete.
6
Click "OK".
Note
When all the necessary settings are completed in the "Alerts" page, click
"Send Test Alert" to send an alert and SNMP trap test.
Use this item to install software updates with new features or software patches.
Caution
• Never install or update software other than that distributed by Sony for the
FSV-M3. Installing or updating other software may destroy data or damage
the system.
• Before you update the software, make sure that no users are currently
accessing the server. You can check for active users with "Current Users" on
the Status menu. If any users are found, instruct them to disconnect from the
server.
• Operation of the server is not assured if the update is not installed from a Sony
package file.
1
Copy the package file (distributed by Sony) to the hard disk of the
computer.
Caution
Enter a copy destination that does not contain any of the following
characters in the "Software File" box of the screen in step 2.
Hyphens "-", underscores "_", or position markers (in Windows, "\" and
":").
(Example) C:\Windows\temp
Note
Download the package file from the StorStation Web site
(http://www.sony.co.jp/en/Products/storagesolution/)
Chapter 3 Using the FSV-M3 Administration Console
34
Advertisement
Table of Contents
