Users - Sony StorStation FSV-M3 User Manual

Users

Adding Local Set Users
Set User R/W Access
Select Set User R/W Access to make this share accessible to selected users
only.
4
Select the check boxes of the permissions that you want to give to each
user.
5
Click the "Submit" button.
The settings are applied to the shares.
Note
If you want to access shares through an NFS client, you must set the server
security to "Public Access" in the Security menu.
Add or delete FSV-M3 users.
There exists two types of users on the FSV-M3.
• Local set users
Users that are registered manually are referred to as "local set users". They are
maintained from "Security" - "Users".
• Windows set users
Users maintained on a Windows Primary Domain Controller. They appear
when the FSV-M3 is used in combination with a Windows domain and are
referred to as "Windows set users". You cannot create, modify, or delete these
users from "Security" - "Users".
Note
You can configure the settings needed to use the FSV-M3 in combination with
a Windows domain from "Network" - "Windows". For details about how to
configure the settings, see "Windows" (page 38) in this chapter.
Register local set users on the FSV-M3 Administration Console.
1
On the FSV-M3 Administration Console, click "Security" - "Users".
The "Users" page appears.
Chapter 3 Using the FSV-M3 Administration Console
59