Ftp - Sony StorStation FSV-M3 User Manual

Mounting Shares on Client Computers

FTP

The "UNIX" page appears.
2
Configure the following items.
Enabled
Select "Yes" to enable the NFS service on the file server.
Important
If you select "Yes" and do not specify addresses for "Valid client addresses
or subnet addresses", all the shares can be mounted from client computers.
If you do not plan to use shares through client computers, make sure that
you select "No".
Valid client addresses or subnet addresses
Enter the IP address of computers or subnets that are authorized to access
shares.
Enter subnet addresses as follows.
(Example) If the subnet is "192.168.5", enter [192].[168].[5].[*]
Note
You can specify a maximum of five addresses.
3
Click the "Submit" button.
To mount shares on a UNIX or Linux computer, follow the example that
follows:
mount -t nfs <host name or IP address of the FSV-M3>:/home/<share name> /
mnt
Note
If you want to access shares through an NFS client, you must set the server
security to "Public Access" in the Security menu. For details about share
security, see "Setting Share Folder Security" (page 58).
Configure these settings for clients using the FTP protocol.
1
On the FSV-M3 Administration Console, click "Network" - "FTP".
Chapter 3 Using the FSV-M3 Administration Console
40