Table of Contents
Advertisement
Storing the Desired Patch in
a
Different Bank
The desired Bank number must be specified when selecting the desired Patch on the
9000.
Setting the required Patchcs, which are
to
be used in a piece of music, in the same Bank
makes the operation easy. This section explains how to set a Patch horn one
Bank
to another,
and how
to
store the Patch with the different Patch number.
*
In the Play mode, select the desired Patch to be stored in the different Bank.
Press the STORE key.
This operation puts the
9000
in a Standby status for store operation, and the
Bank
number
and the Patch number start flashing.
I
M N K PATCH
STORE
CANCEL
Displayed Items In a Standby Status for Store Operation
Using the BANK DOWN/UP key and the PATCH
1
to
4
key, specify the Bank
number and then the Patch number with which the Patch is to be stored.
W :
When store operation of new data is carried out, the data cunently being stored in the
Bank
will be deleted first. Be sure that the Patch currently being stored is not necessary.
Sec
page
22
to restore the factory-set Patches if you miserased the Patches.
Press the STORE key again. This operation stores the Patch in the Bank.
%'M:
Pressing the EDITjCANCEL key before pressing the STORE key for the second time stops
store operation, and the
9000
goes into the Play mode.
Advertisement
Table of Contents
