Engine Components; Spark Plugs; Cam Sensor; Air Screen - Westerbeke 3.5KW SBCG-60Hz Operator's Manual

ENGINE COMPONENTS:
SPARK PLUGS
The spark plugs should
be
cleaned and re-gapped after the
first 50 hour break-in period, then inspected every 250 hours
thereafter and replaced as needed.
A
WARNING:
Do not remove the spark plugs while
the engine is hot. Allow the engine
to
cool before
removing them.
SPARK PLUG GAP: 0.032 - 0.035io. (0.8 - 0.9mm).
SPARK PLUG TORQUE: 11 -15Ib-ft (15 - 26 Nm).
NOTE: Loctite Anti-Seize applied to the threaded portion of
the spark plugs will retard corrosion, making future removal
of the spark plugs easier.
t
GAP ~i
I
INSPECT FOR
WEAR & CARBON
INSPECTl.NG
THE SPARK
PLUGS
. / INSPECT FOR
_~~
__ / DAMAGE
CAM SENSOR
\
AIR SCREEN
THE AIR SCREEN SHOULD BE
CLEANED AFTER THE FIRST 50
HOURS OF OPERATING. AND EACH
100 HOURS FROM THEN ON. CLEAN
WITH A WATER SOLUBLE CLEANER
SUCH AS GUNK.
'"----CHECK FOR
DETERIORATION
AND DAMAGE
LOCATED ON TOP OF THE
'=-::::::1'1-""
FLYWHEEL HOUSING
ECU
(ELECTRONIC CONTROL UNIT)
Engines & Generators
20
CONTROL PANEL
HOURMETER
FAULT LEOS
START/STOP
ROCKER SWITCH
20A CIRCUIT
BREAKER
8A FUSE
MAIN CIRCUIT
BREAKER