Table of Contents
Advertisement
H8DAR-T/H8DAR-E User's Manual
Power LED/Speaker
On JD1, pins 1, 2, and 3 are for the
power LED and pins 4 through 7 are
for the speaker. See the tables on the
right for pin defi nitions.
Note: The speaker connector pins are
for use with an external speaker. If
you wish to use the onboard speaker,
you should close pins 6 and 7 with a
jumper.
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and the PS/2
mouse ports are located at J101 and
J132, respectively. See the table on
the right for pin defi nitions.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a Wake-On-Ring card and
cable to use this feature.
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL. See the table on the
right for pin defi nitions. You must
have a LAN card with a Wake-On-LAN
connector and cable to use the Wake-
On-LAN feature.
PWR LED Connector
Pin Defi nitions (JD1)
Pin#
Defi nition
1
+Vcc
2
-Vcc
3
-Vcc
Speaker Connector
Pin Defi nitions (JD1)
Pin#
Defi nition
4
Red wire, Speaker data
5
No connection
6
Buzzer signal
7
Speaker data
PS/2 Keyboard and Mouse Port
Pin Defi nitions
(J101/J132)
Pin #
Defi nition
1
Data
2
NC
3
Ground
Wake-On-Ring
Pin Defi nitions
Pin#
1
2
Wake-On-LAN
Pin Defi nitions
Pin#
1
2
3
2-12
Pin #
Defi nition
4
VCC
5
Clock
6
NC
(JWOR)
Defi nition
Ground (Black)
Wake-up
(JWOL)
Defi nition
+5V Standby
Ground
Wake-up
Advertisement
Table of Contents
