Ide Connectors - Supermicro Supero H8DAR-T User Manual

H8DAR-T/H8DAR-E User's Manual

IDE Connectors

There are no jumpers to confi g-
ure the onboard IDE#1 and #2
connectors. See the table on
the right for pin defi nitions.
SATA Ports
There are no jumpers to con-
fi gure the SATA ports, which
are designated M-SATA0,
M-SATA1, M-SATA2 and M-
SATA3. See the table on the
right for pin defi nitions.
IDE Drive Connectors
Pin Defi nitions (JIDE#1/JIDE#2)
Pin# Defi nition Pin #
1 Reset IDE 2
3 Host Data 7 4
5 Host Data 6 6
7 Host Data 5 8
9 Host Data 4 10
11 Host Data 3 12
13 Host Data 2 14
15 Host Data 1 16
17 Host Data 0 18
19 Ground 20
21 DRQ3 22
23 I/O Write 24
25 I/O Read 26
27 IOCHRDY 28
29 DACK3 30
31 IRQ14 32
33 Addr1 34
35 Addr0 36
37 Chip Select 0 38
39 Activity 40
SATA Ports
Pin Defi nitions (M-SATA0~3)
Pin # Defi nition
1 Ground
2 TXP
3 TXN
4 Ground
5 RXN
6 RXP
7 Ground
2-20
Defi nition
Ground
Host Data 8
Host Data 9
Host Data 10
Host Data 11
Host Data 12
Host Data 13
Host Data 14
Host Data 15
Key
Ground
Ground
Ground
BALE
Ground
IOCS16
Ground
Addr2
Chip Select 1
Ground