Led Indicators - Supermicro SuperServer SYS-510P-WT User Manual

4.5 LED Indicators

LAN LEDs
Two LAN ports (LAN 1 and LAN 2) are located on the I/O back panel of the motherboard.
Each Ethernet LAN port has two LEDs. The green LED indicates activity, while the other Link
LED may be green, amber, or off to indicate the speed of the connection. Refer to the tables
below for more information.
LAN1/2 Activity LED (Right)
LED State
Color Status
Green Flashing
Unit ID LED
A rear UID LED indicator (UID-LED) is located near the UID switch on the I/O back panel.
This UID indicator provides easy identification of a system unit that may need service.
IPMI LAN LEDs
In addition to LAN1 and LAN2, an IPMI LAN is also located on the I/O back panel. The
amber LED on the right indicates activity, while the LED on the left indicates the speed of
the connection. Refer to the table below for more information.
LAN 1/LAN 2
IPMI LAN
Link LED
IPMI LAN
(X8ST3-F)
BMC Heartbeat LED
A BMC Heartbeat LED is located at LEDBMC on the motherboard. When LEDBMC is blinking,
the BMC is functioning normally. Refer to the table below for more information.
Definition
Active
UID LED
LED Indicator
LED Color
Blue: On
Activity LED
Link (left)
Activity (Right)
BMC Heartbeat LED Indicator
LED Color
Green: Blinking
Chapter 4: Motherboard Connections
LAN1/2 Link LED (Left)
LED State
LED Color Definition
Green 10Gbps
Yellow/Amber 1Gbps
Definition
Unit Identified
IPMI LAN LEDs
Color/State
Green: Solid
Amber: Solid
Amber: Blinking
Definition
BMC Normal
64
Definition
100 Mbps
1Gbps
Active