TC Electronic INTONATOR User Manual page 9

FRONT PANEL
SCALE/SETUP MANUAL
DIAL
SCALE
SETUP
ALPHA DIAL PITCH
SCALE/SETUP
SCALE/SETUP KEY
Toggles between Scale
selection and Setup pages.
The Setup pages
automatically exit to Scale
after approx. 6 seconds.
ALPHA DIAL - ENTER KEY
Changes values according
to SCALE/SETUP key.
When pushed this dial
works as an "ENTER" key
used to confirm actions.
MANUAL PITCH KNOB
Additional pitch bend
control.
CORRECTION PROCESSING
MANUAL NOTE HOLD CORRECTION
ON HOLD BYPASS
75 MEDIUM 3
50 100 2
25 150 1
0 200 FAST SLOW 0
cent rel. rel.
WINDOW ATTACK AMOUNT
CORRECTION PROCESSING
MANUAL KEY
Switches between Manual and
Automatic modes.
PITCH WINDOW
Defines the area which the Input pitch
must be within, to be corrected to a
Target note. The Pitch Window can be set
to +/- 200 cent. (100 cent is 1 semitone).
NOTE HOLD
Press and hold this key to hold the
current corrected pitch.
ATTACK
Controls how fast the pitch is corrected
to the "correct" note.
CORRECTION - BYPASS
Bypasses all pitch correction.
CORRECTION AMOUNT CONTROL
Controls how much of the automatic
correction is used. This control is
intelligently scaled, giving you greater
correction the more the Input note is out
of pitch.
AUTOMATED DYNAMICS
DE-ESS LOW CUT FILTER
ON Adaptive
Active Manual
3 120
4 2 4
5 1 5
6 0 6 55 265/
rel. Hz
DE-ESS FREQUENCY
AUTOMATED DYNAMICS
DE-ESS KEY
Turns the De-esser on/off.
DE-ESS KNOB
Controls the amount of
Ess-reduction.
DE-ESS LED
The LED indicates when the
De-esser is activated.
LOW CUT FILTER KEY
Toggles the Adaptive Low Cut
between:
Off
Adaptive - In Adaptive mode the
Manual
LOW CUT FREQUENCY KNOB
Sets the Threshold frequency of the
Manual and Adaptive filters.
- Inactive.
Low Cut Threshold
frequency adapts to the
Input pitch.
- The set Low Cut frequency
is fixed as in a normal
Low Cut filter.
7