Pitch Bypass; Adaptive Low Cut Key; Adaptive Low Cut Filter; De-Ess Key - TC Electronic INTONATOR User Manual

MIDI CONTINUOUS CONTROLLERS

Pitch Bypass

The unit responds to the following message values for
changing between Manual and Automatic modes.
Parameter Data Range
cc #26 0 -127
0 - 63 off
64 -127 on
The Pitch Bypass key is a toggle type switch.
The message that is sent out is dependent on the current
state. If Pitch Bypass is on, a button press turns off
Pitch Bypass and sends the Pitch Bypass off message.

Adaptive Low Cut key

The unit responds to the following message values for
turning the Adaptive Low Cut function on and off.
Message is sent out and responds in the same way.
Parameter Data Range
cc #30 0 - 2
0 off
1 fixed
2 adaptive
3 -127 reserved

Adaptive Low Cut Filter

Parameter Data Range
cc #31 0 -127
0 50 Hz
126 247 Hz
127 250 Hz (in fixed mode)
127 infinity (in adaptive mode)
24

De-ess key

The unit responds to the following message values for
turning the De-Ess function on and off.
Parameter Data Range
cc #27 0 -127
0 - 63 off
64 -127 on
The De-ess key is a toggle type switch. The message
that is sent out depends on the current state.
If De-ess is on, a key press turns off De-ess and sends
the De-ess off message.
Parameter Data Range
cc #27 0 -127
0 off
127 on

De-ess Control

Parameter Data Range
cc#28 0 -127
0 very little ess reduction
-
-
-
127 no esses left

Correction Amount

The unit will send this message, but not respond to it.
This will be used by the PC program for display
purposes.
Parameter Data Range
cc#19 MSB 0 -3FFFh
cc#51 LSB MSB LSB
00 00h
40 00h
7F 7Fh
-200 cents
0 cents
+200 cents