Option Menu - Hitachi CP-X1230 User Manual – Operating Manual

Hitachi user's manual projector cp-x1230
Hide thumbs Also See for CP-X1230:
Table of Contents

Advertisement

Multifunctional Settings (continued)
Multifunctional Settings (continued)

OPTION Menu

With the OPTION menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
VOLUME
SPEAKER
IR REMOTE
LAMP TIME
FILTER TIME
32
Adjust the volume using the
High
Low
Select the TURN ON or the TURN OFF using the
TURN ON
TURN OFF
When the TURN ON is selected, the built-in speaker works.
Select a remote sensor using the
it using the ENTER button (2). :
(1) 1 : FRONT
2 : TOP
memo
A sensor cannot be turned off when the other two are off.
Always at least one sensor is on.
Pressing the RESET button for about 3 seconds displays the LAMP TIME menu.
Select the RESET using
RESET
CANCEL
Selecting the RESET resets the count of the lamp timer to 0.
memo
Perform this function only when you have replaced the lamp. The lamp
timer counts the used time of the current lamp, to display the messages about
the lamp. Incorrect performing causes incorrect operation of the messages.
memo
About replacing the lamp, please refer to the section" Lamp".
Pressing the RESET button for about 3 seconds displays the FILTER TIME
menu.
Select the RESET using
RESET
CANCEL
Selecting the RESET resets the count of the lamp timer to 0.
memo
Perform this function only when you have cleaned or replaced the air
filter. The filter timer counts the used time of the air filter after cleaning or
replacement, to display the messages about the air filter. Incorrect performing
causes incorrect operation of the messages.
memo
About caring for the air filter, please refer to the section "Air Filter".
Description
/
buttons. :
/
button (1), then switch
3 : REAR (2)
(Off)
button to reset the timer. :
button to reset the timer. :
(This table is continued to the following page.)
MENU
MAIN
VOLUME
PICTURE-1
SPEAKER
PICTURE-2
IR REMOTE
INPUT
LAMP TIME
AUTO
FILTER TIME
SCREEN
SERVICE
OPTION
RESET
: SELECT
/
buttons. :
OPTION
IR REMOTE
1 : FRONT
(On)
2 : TOP
3 : REAR
ENT
16
TURN ON
1: 2: 3:
1234 h
4321 h

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-x1230w

Table of Contents