Picture-2 Menu - Hitachi CP-X1230 User Manual – Operating Manual

Multifunctional Settings (continued)
Multifunctional Settings (continued)

PICTURE-2 Menu

With the PICTURE-2 menu, the items shown in the table below can
be performed. Perform each operation in accordance with the
instructions in the table below.
Item
Adjust the vertical position using the
V POSITION
memo
Adjust the horizontal position using the
H POSITION
memo
Adjust the horizontal phase to eliminate flicker using the
H PHASE
memo
signal other than a COMPONENT port input of 525i(480i)/625i(576i)/SCART
RGB.
Adjust the horizontal size using the
memo
H SIZE
memo
correctly. In such a case, please reset the adjustment pressing the RESET
button during this operation.
Adjust the over-scan ratio using the
memo
OVER SCAN
memo
the frame area of the picture. In such a case, please adjust small.
memo
your reference, and might not be exact display ratio.
Select the EXECUTE using the
RESET
The items of the PICTURE-2 menu are collectively returned to the initial setting.
Note that the item "H PHASE" is not reset.
Up Down
This item can be selected only at a RGB signal.
Left Right
This item can be selected only at a RGB signal.
Right Left
This item can be selected only at a RGB signal or a component video
Large Small
This item can be selected only at a RGB signal.
When this adjustment is excessive, the picture may not be displayed
Small Large
This item can be selected only at a video signal.
When this adjustment is too large, certain degradation may appear at
The number displayed on the menu during this adjustment is just for
EXECUTE CANCEL
Description
/ buttons. :
/ buttons. :
/ buttons. :
/ buttons. :
button to reset the PICTURE-2 menu items. :
MENU
MAIN
V POSITION 20
PICTURE-1 H POSITION 142
PICTURE-2 H PHASE 31
INPUT
H SIZE 1344
AUTO OVER SCAN 95
SCREEN
RESET
OPTION
: SELECT
/ buttons. :
25