Table of Contents
Advertisement
Multifunctional Settings (continued)
Multifunctional Settings (continued)
SCREEN Menu (continued)
Item
Select the TURN ON or the TURN OFF using the
When the TURN ON is selected, the following message function works.
MESSAGE
Select the EXECUTE using the
RESET
The items of the SCREEN menu are collectively returned to the initial setting.
How to register your picture as the MyScreen
MyScreen is pointed on the SCREEN menu.
Do you capture the picture from
If the ESC/RESET
button is pressed ...
The picture freeze and the frame for capturing appears.
Move the frame to the position of the picture
which you want to use, using
and press the ENTER button to register.
It takes about 1 minute to register.
Just when the picture registration is completed
the registered screen and
the message of the right is displayed for a few seconds.
If the picture registration failed,
the message of the right is displayed for a few seconds.
TURN ON
TURN OFF
The message of the "AUTO IN PROGRESS" for the auto adjustment.
The message of the "NO INPUT IS DETECTED"
The message of the "SYNC IS OUT OF RANGE"
The message of the "Searching ..."
The message of the "Detecting ..."
The indication of the input signal by input change.
The indication of the aspect ratio by changing the aspect ratio.
The indication of "FOCUS" by adjusting the focus.
EXECUTE
CANCEL
Press the
The MyScreen
menu appears.
the current screen?
YES: Press the ENTER button
/
Registering.
Description
button to reset the SCREEN menu items. :
button
NO: Press the ESC/RESET button
/
/
buttons,
/
buttons. :
MyScreen
Do you start capturing this picture?
ESC
:NO
ENT
:YES
MyScreen
Move the capture area
as you want.
ESC
:RETURN
ENT :NEXT
My Screen
MyScreen registration is finished.
A capturing error has occurred.
Please try again.
45%
31
Advertisement
Table of Contents
