Removing The Hinge Cover; Replacing The Hinge Cover - Dell Inspiron 9300 Service Manual
Hide thumbs
Also See for Inspiron 9300:
- Owner's manual (132 pages) ,
- Owner's manual (132 pages) ,
- Service manual (60 pages)
Table of Contents
Advertisement
Back to Contents Page
Hinge Cover
Dell™ Inspiron™ 9300 Service Manual
Removing the Hinge Cover
Replacing the Hinge Cover
Removing the Hinge Cover
CAUTION:
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must
NOTICE:
The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the hinge cover.
1. Follow the instructions in
"Before Working Inside Your
2. Open the display all the way (180 degrees) so that it lies flat against your work surface.
3. Using a small flat-blade screwdriver, insert the screwdriver on the right side to gently pry the hinge cover loose.
4. Pulling up from right to left, remove the hinge cover.
1 hinge cover
5. Disconnect your computer and all attached devices from their electrical outlets.
Replacing the Hinge Cover
With the display open all the way (180 degrees) so that it lies flat against the work surface, snap the cover back into place, starting from left to right.
Back to Contents Page
remove the main battery
before you begin working inside the computer.
Computer."
Advertisement
Table of Contents
