Installing The Display Assembly; Removing The Display Bezel - Dell Vostro 5460 Owner's Manual

Installing the Display Assembly

1. Align the base panel of the computer to the display hinges.
2. Install the screws that secure the display hinges to the system board.
3. Connect the LVDS cable and the camera cable to the connectors on the system board.
4. Install :
a) battery
b) base cover
5. Follow the procedures in

Removing the Display Bezel

1. Follow the procedures in
2. Remove :
a) base cover
b) battery
c) display assembly
3. Rotate the hinge brackets as the angle shown to facilitate easy removal of the display bezel.
4. Pry on the plastic caps that cover the display bezel screws and remove them.
22
After Working Inside Your Computer.
Before Working Inside Your Computer .