Installing The System Board; Removing The Speakers - Dell Vostro 5460 Owner's Manual

Installing the System Board

1. Place the system board into its original position on the chassis.
2. Install the screws that secure the system board to the chassis.
3. Connect :
a) camera cable
b) touchpad cable
c) keyboard cable
d) display cable
e) speaker cable
4. Install :
a) memory
b) heat sink
c) system fan
d) battery
e) base cover
5. Follow the procedures in

Removing the Speakers

1. Follow the procedures in
2. Remove :
a) base cover
b) battery
c) hard drive
d) WLAN card
e) mSATA solid state drive
f) coin-cell battery
g) system fan
h) heat sink
i) system board
3. Disengage the tabs that secure the speakers to the chassis on both sides of the computer.
18
After Working Inside Your Computer.
Before Working Inside Your Computer .