Installing The Heat Sink; Removing The Memory - Dell Vostro 5460 Owner's Manual

Installing the Heat Sink

1. Place the heat sink into its original position on the system board.
2. Tighten the screws that secure the heat sink to the system board.
3. Install :
a) system fan
b) battery
c) base cover
4. Follow the procedures in

Removing the Memory

1. Follow the procedures in
2. Remove:
a) base cover
b) battery
c) system fan
d) heat sink
3. Pry the securing clips away from the memory module until it pops up. Remove the memory module from its
connector on the system board.
After Working Inside Your Computer.
Before Working Inside Your Computer .
15