Accessories - HP System/E41 User Manual

Chapter 2

Accessories

To complement the functionality of your standard rack, a wide assortment of accessories is available.
Accessories shown below are a quartz gray color and are also available in a graphite color (denoted by an
asterisk*). These accessories allow you to complete your system with only the items you require while
providing you a certified and tested solution.
Tie-together kit
J1512B, J1513B
J1512D*, J1513D*
Filler panel
J1514A
J4387A*
Console Switch
J1474A
PDUs
The HP Power Distribution Units (PDUs) are designed to provide flexibility for your power requirements.
To provide power to the rack, a PDU must be ordered as an accessory. There are different types of PDUs
available for different voltages. All input leads from the mains, except safety ground, are interrupted in the
event of a short circuit.
The PDUs can be mounted both vertically and horizontally on the rear rack columns, depending on your
rack configuration. If you purchased the bundle containing both the 10 and 16-amp products, you can con-
nect them to each other with the provided cord. Use the EIA holes for horizontal mounting, and the acces-
sory holes for vertical mounting.
Each rack can be equipped with up to six PDUs. Each PDU must be purchased as an accessory. Figure 2-3
shows some PDU Mounting schemes.
Cable guide
PDU
E7723B
E7670A, E7671A, E7672A,
E7674A, E7675A, E7676A
Monitor tray
Lifting hooks
J1519B
J1521A
J1519D*
Side panel
J1506A, J1507A, J1508A
J1506D*, J1507D*
Front door
(Power Distribution Unit)
J1509A, J1510A, J1511A
J1509D*, J1510D*
Keyboard tray
J1518A
J1518D*
Vertical Extension Kit
J1471A
Description
Flat Panel Display
J1470A
Universal shelf
J1520A
J1520D*
7