Connecting The Pc Audio To The Monitor; Connecting The Vga / Dvi-I Signal To The Monitor; Identifying The Dvi Cable; Dvi-A To Vga (D-Sub) - Bosch MON192CL10 Instruction Manual

MON192CL10
4.5

Connecting the PC Audio to the Monitor

There is one (1) audio input for the PC (see Figure 4.8 on page 9); for use with the supplied
Mini Phone Jack Audio Cable. The audio input is designed to accept line level audio, 1 V peak
to peak.
4.6

Connecting the VGA / DVI-I Signal to the Monitor

The monitor can be connected two ways:
Connect the analog VGA signal by using the provided VGA cable (DVI-A to D-SUB)
- or-
Connect the digital DVI-I signal by using the DVI cable (DVI-D to DVI-D) provided.
Fig. 4.8 DVI-I Input and Audio Connector
4.7

Identifying the DVI Cable

The MON192CL10 has a DVI-I connector which supports digital (DVI) and analog (VGA) sig-
nals. The unit is supplied with two (2) different DVI cables.
4.7.1

DVI-A to VGA (D-SUB)

If the source has a VGA connector use the VGA cable (DVI-A to D-SUB) provided.
Fig. 4.9 DVI-A to VGA (D-SUB)
Reference # Description
1
2, 3
4
Bosch Security Systems, Inc.
MON192CL10 DVI-I Female Connector
DVI-A Male to D-SUB Male Cable
Source D-SUB Female Connector
Instruction Manual
Installing the MON192CL10 | en
F01U032133 | 1.0 | 2007.03
9