Table of Contents
Advertisement
MON152CL30 | Instruction Manual | Installation
6.5
Connecting the Y/C (S-video)
Signal to the Monitor
There is one (1) mini-DIN type connector for the S-
video (Y/C) input (as shown in Figure 5 and Figure 6).
NOTE: Both Y and C inputs are terminated with
75 ohm.
4
2
Figure 5: Y/C Connection Pin-out
6.6
Connecting Audio to the Monitor
There are two (2) sets of audio connectors (Figure 6);
one set is audio input (R) and input (L); the second set
is audio output (R) and audio output (L).
Audio input (L)
Audio input (R)
Audio output (R)
Audio output (L)
Figure 6: Connectors - Exploded View
Bosch Security Systems | April 12, 2006
3
1. GND
2. GND
3. Y-signal IN or OUT
4. C-signal IN or OUT
1
Video 2 input
Video 1 input
VGA / DVI-I input
Y/C input (S-video)
Video 1 output
Video 2 output
6.7
Connecting the VGA / DVI-I Signal
to the Monitor
6.7.1
VGA Signal
Connect the analog VGA signal using the provided
VGA cable (DVI-I to D-SUB).
6.7.2 DVI-I Signal
Connect the digital DVI-I signal using a standard
DVI-I cable (not provided).
Figure 7: VGA / DVI-I Input
6.8
Ventilation
To prevent overheating, ensure that the ventilation
openings on the rear of the monitor are not covered.
EN | 11
Advertisement
Table of Contents
