Subscribe to Our Youtube Channel
Related Manuals for Salter 9108 BMI Scale
Summary of Contents for Salter 9108 BMI Scale
- Page 1 9108A Body Fat Analyzer and Scale please read this instruction manual before using the product for the first time...
- Page 2 HOW DOES THE SALTER® BODY FAT AND ANALYZER AND SCALE WORK? The Salter® Body Fat Analyzer and Scale uses BIA (Bio Impedance Analysis) technology which passes a tiny electrical impulse through the body to determine fat from lean tissue, the electrical impulse cannot be felt and is perfectly safe.
-
Page 3: Body Fat And Water Table
• Reversing the decline in strength, bone density and muscle mass that accompanies age • Maintenance of flexible joints • Guide weight reduction when combined with a healthy diet. NORMAL HEALTHY RANGE OF BODY FAT & TOTAL BODY WATER PERCENTAGE MALE FEMALE BODY FAT... -
Page 4: What Does My Bmi Value Mean
WHAT DOES MY BMI VALUE MEAN? Your Salter® Scale calculates your BMI value. Below is a useful chart to show the correlation between height, weight and the BMI categories Underweight, Normal, Overweight and Obese. Your weight in kilos UNDER- NORMAL... -
Page 5: Questions And Answers
My friend has a Body Fat Analyzer made by another manufacturer. When I used it I found that I got a different body fat reading to that on my Salter® Body Fat Analyzer and Scale. Why is this? Different Body Fat Analyzers take measurements around different parts of the body and use different mathematic algorithms to calculate the percentage of body fat.The best advice is to not make... -
Page 6: Child Mode
PERSONAL DATA ENTRY 1) Press the on/off button to turn the scale on. 2) While ‘----’ is flashing, press the SET button to activate the set-up procedure. The display shows the current gender, age & height.The user number will flash. 3) While the user number is flashing, select a user number by pressing the ▲... -
Page 7: Weight & Body Fat Readings
8) The display will show your settings, wait for 0.0 to be displayed, then allow the scale to switch off. The memory is then set. 9) Repeat procedure for a second user, or to change user details. Note: To update or overwrite the memorised data, follow the same procedure, making changes as required. -
Page 8: Technical Specification
WEIGHT READING ONLY Position the scale on a flat level surface. a) Tap the center of the platform firmly to activate the scale. b) Remove foot from platform and WAIT for display to show a zero reading. c) To change weight mode press the SET button. d) While zero is displayed, step onto the platform and stand still. -
Page 9: Troubleshooting Guide
POSITION BATTERY Requires 4 x AAA batteries. Position scale on flat surface. ADVICE FOR USE AND CARE • Always weigh yourself on the same scale placed on the same floor surface. Do not compare weight readings from one scale to another as some differences will exist due to manufacturing tolerances. -
Page 10: Year Limited Warranty
©2012 Salter Housewares and its affiliated companies, all rights reserved. Salter® is a registered trademark of Salter Housewares and its affiliated companies. All rights reserved.
Need help?
Do you have a question about the 9108 BMI Scale and is the answer not in the manual?
Questions and answers
there appears to be no on/off switch on my salter BMI scales model 9108
Yes, the Salter 9108 BMI Scale has an on/off button used to turn the scale on.
This answer is automatically generated
I have a salter scale I believe might be 9108EF. It has an up arrow, on/off switch, set and down arrow. I can not set it to pounds. It wants to stay on St. How do I switch it to pounds. I have tried everything
To switch the Salter 9108 BMI Scale from stone to pounds, press the ▲ button while the weight mode display is flashing until the desired unit (lb) is selected, then press the SET button to confirm.
This answer is automatically generated
Whenever I step on my scale, it reads 00 and gives me the error message - - - E (see the attached photo). Is there a way for me to fix this problem so the scale works properly and shows my actual weight again?
The error message "E" is not specifically explained in the provided context. However, to ensure your Salter 9108 BMI Scale shows your actual weight correctly, follow these steps:
1. Place the scale on a hard, flat, even floor.
2. Tap the center of the platform firmly to activate it.
3. Wait for the display to show zero.
4. Step on the platform with bare feet and stand still.
5. Remain still for 2–3 seconds until your weight is displayed.
Also, ensure the battery is not low ("Lo" means replace battery) and that the weight does not exceed the maximum limit ("O-Ld" means overload). Keep the scale clean and dry, and avoid using it with wet feet or on carpeted surfaces.
This answer is automatically generated
The battery compartment felt off and I don’t know how to connect the red and black wire