Automatic station presetting with the built-in tuner
Automatic station presetting with the built-in tuner
Perform this feature to search for and store new analogue and digital TV programmes after the
Automatic Installation (see pages 14-15).
Preparation:
Make sure your antenna is connected to the aerial input (see page 11). Select ATV or DTV (see
page 16), and then press MENU SETUP
/
to select Channel, and then press ENTER/CH LIST
1
Press
In ATV mode:
2
/
to select Country, and then press
(1) Press
/
to select your country.
/
to select Auto Tuning, and then press ENTER/CH LIST
(2) Press
(3) A message prompt will appear with option
to delete previously stored channels.
/
to select Yes or No, and then
Press
press ENTER/CH LIST
The automatic tuning will search for available
channels and store them in a correct order.
During the search the sound is muted. When all
channels have been stored, the normal TV
screen will appear.
*
In DTV mode:
Perform the steps 4-6 as detailed in DTV auto tuning/Setting Antenna or Cable on pages
16-17.
Note:
• The DVB-C function cannot be initiated when switching the setting of Ant/Cable In to
Cable. Please check if this function is supported in the place you live, and if the latest
firmware has been installed on your TV (see DVB-C Notice on page 2 and DVB-C
function notice on page 12).
or DIGITAL MENU
Country
Auto Tuning will delete all previously
.
stored channels -
Do you want to proceed?
Analogue Channel Found
.
.
Germany
>>
>>
>>
: Adjust
.
Yes
No
: Adjust
0
EXIT : Cancel
19