Manual Tv Station Presetting; Basic Operation - Toshiba 19DV550P Service Manual

Automatic station presetting with the built-in Tuner/
Changing the order of stored channels
Note:
• When the COUNTRY is set to UK,
the automatic tuning will search for
UHF broad-casts only.
• When changing the order of the
channels, it is best to start with Ch1.
12
51K0201A_ENG.indd 12

Basic Operation

Note:
• If the built-in tuner does not receive
anything (e.g. if no antenna is
connected) during TV-operation, then
the TV-unit will change to standby
after approx. 15 minutes.
14
51K0201A_ENG.indd 14
Automatic station presetting with the built-in Tuner
Perform this feature to search for and store new TV programmes
after the Automatic installation. (see page 10)
Preparation:
Make sure your antenna is connected to the aerial input (see
page 9). Select TV (see page 11). Then press MENU.
1 Select AUTO TUNING, then press
ENTER.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
VERTICAL POSITION
AUTO 4:3 DEFAULT
2 Select COUNTRY, then press ENTER.
Press or to select your country,
COUNTRY
then press ENTER.
START
3 Select START. Then press ENTER.
The automatic tuning will search for available broadcasts
and should store the channels in the correct order. During
the search the sound is muted. When all programs have
been stored, the normal TV screen will appear.
Changing the order of stored channels
The Automatic station presetting stores the stations in a specific
order. However, this order can be changed if you wish.
1 Select CH ALLOCATION.
Then press ENTER.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
VERTICAL POSITION
AUTO 4:3 DEFAULT
2 Select desired option, then press
ENTER.
SORT
ERASE PROGRAM
SKIP
CH LABEL
3 After setting the each option, press MENU to return to CH
ALLOCATION menu.
4 Press EXIT to return to the normal screen.
Description about the each setting option:
SORT: Press or to select the channel that you want to
move, then press ENTER.
Press or to select the position that you want to move the
channel to, then press ENTER.
ERASE PROGRAM: Press or to select the channel that you
want to erase, then press ENTER.
SKIP: Press or to select the channel that you want to skip,
then press ENTER. mark will appear.
CH LABEL: Press or to select channel that you want to
rename, then press ENTER. Press or to select character,
then press or . The cursor will move to the next position.
Press ENTER to set the channel label.
Channel selection
With the numbered buttons.
Example:
• No. 2: Press 0 and within 2 seconds, press 2.
• No. 29: Press 2 and within 2 seconds, press 9.
Press P + or – to change up or down a channel. This takes
approx. 2 seconds. If the auto search only stored 5 stations,
only these 5 will appear. Skipped channels will not appear (see
page12).
The CH LIST shows a list of all receivable programmes.
They are located in channels 1 to 99.
Press CH LIST to display the CH LIST.
Press or to select the desired channel.
Press CH LIST to display the selected channel. Press EXIT to
exit.
QuickView
CH RTN button allows you to go back to the last selected
channel.
Volume adjusting
Press VOL + or – to adjust the volume. The volume level
indicator disappears after 4 seconds.
MUTE
Press MUTE. The sound will be cut off. MUTE will appear for
approx. 4 seconds.
The muting can be released by pressing MUTE again or VOL +
or –.
Information display
Press DISPLAY. Channel
number and picture size S T E R E O
setting will appear for
approx. 4 seconds.
A U T O
SLEEP TIMER
To set the sleep timer press SLEEP. SLEEP and the minutes will
appear. Each time you press SLEEP, the SLEEP time shown
will change in the order of 120, 110, 100, 90, 80, 70, 60, 50,
40, 30, 20, 10, 0. When the displayed time runs out, the unit
will switch to standby. The display will disappear after approx. 4
seconds.
To cancel the sleep timer:
Press SLEEP repeatedly until '0' appears.
If you like, you may manually tune a certain station into a selected program position, without
deleting or modifying program position's contents. Example: Store the BBC 2 into program
position 2.
ENGLISH
0
4:3
GERMANY
GERMANY
ENGLISH
0
4:3
Note:
• Usually fine tuning is not necessary,
due to tuning's automatically
stopping at the very best position. If
you fine-tune anyway, proper working
of teletext-reception with built-in
tuner is no longer guaranteed.
9/12/08 4:54:38 PM 51K0201A_ENG.indd 13
Teletext is sent page by page. This unit is able to automatically store up to 256 pages, but they can only be
accessed once they have been stored. This can take a few moments.
Fastext/TOPtext
The Fastext/TOPtext is teletext with a special
directory.
On the lower part of the screen there are four
different coloured fields (red, green, yellow and
blue). These fields lead directly to the pages
shown within. The coloured buttons on the remote
control correspond to the coloured fields. Press the
appropriate coloured button in order to activate the
desired colour field.
Switch on / off Teletext
Teletext is not transmitted by all channels.
Select a channel that shows teletext.
Press . You will now see a teletext page. (If
"100" is shown without any text information, it may
mean that the channel you have selected does not
support teletext.)
Press again in order to switch off teletext.
Press again in order to switch on teletext again.
The last page which was stored is now shown.
Note:
• You cannot select any other channels as long as
teletext is switched on. Switch teletext off when
you want to switch over to another channel.
1
Select Page
B B C 1
Press P + or – until the page you desire appears. Or
... enter the requested page number by using the 10
Number Buttons.
And if you mistype something, just enter the com-
plete 3-digit wrong page number then enter the de-
sired number again. Or ... press one of the coloured
teletext buttons so that a page from Fastext/TOPtext
is shown.
9/12/08 4:54:40 PM 51K0201A_ENG.indd 15

Manual TV station presetting

1
Preparation: connect aerial cable. Select program position
2. Press 2 (see page 14). OSD will indicate "2" in right upper
corner. Eventually recently stored TV-channel's name might
also appear.
2
Press MENU. Press or to select
tool-page (see right). Press or
to select MANUAL TUNING.
Press ENTER.
3
Press or to select COLOUR
SYSTEM, then press ENTER.
Press or to select AUTO,
PAL or SECAM, then press
ENTER.
4
Press or to select SOUND
SYSTEM, then press ENTER.
Press or to select AUTO, B/G, I,
D/K or L/L', then press ENTER.
5
Press or to select SEARCH.
Press ENTER. Press or ,
to start tuning. Tuning will stop
automatically at next available
station. If this does not happen to
be the BBC 2, press or again to
continue tuning for the BBC 2.
Then press ENTER.
6
If you like to use fine-tuning, select
FINE and press ENTER. Press or
to fine tune. See the note on this
page.
7
To store other stations in additional memory-cells, repeat
steps 1 to 6.
8
Press EXIT to return to the normal screen.
Hold Pages
Some pages are divided up into subpages by the
channel.
Subpages are automatically shown in turn, as they
are transmitted. In order to hold the page, press
Press again in order to display the next subpage.
Directly Select Subpages
You can directly select the subpages if required.
Example:
Page 128 from Teletext comprises of 2 subpages. In
the right upper corner you will, for example, see 1/2.
That means that page one of 2 subpages is being
shown at the moment.
128 128 CEEFAX 21.07.03 15:01:38
Press in order to select subpage 2. 4 dashes
(----) are shown. Enter 0 0 0 2. It can take a minute
TELETEXT
before subpage 0002 appears.
Press again in order to switch off the subpage
feature.
You can only select other teletext pages when the
subpage feature is switched off.
Enlargement
In order to enlarge the display, press
Either the upper or lower half of the screen is
enlarged.
Each time you press you switch between the
display of the upper or lower half of the screen or
the full picture.
Answering Quiz Questions
Some pages contain quiz questions with concealed
answers.
Press in order to show the answers.
Page 100
Press ENTER in order to show page 100.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
4:3
SEARCH
FINE 168.30MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
BBC1 168.30MHz
AUTO
SEARCH
FINE 168.30MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
BBC1 168.30MHz
AUTO
SEARCH
FINE 168.30MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
BBC1 168.30MHz
SEARCH
FINE 175.30MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
BBC1 175.30MHz
13
9/12/08 4:54:39 PM
Teletext
.
1/2
.
15
9/12/08 4:54:41 PM