Functional Setups; Setting Multi Station Print - Toshiba e-STUDIO2000AC Operator's Manual

Functional Setups

0.
 Setting Multi Station Print
Multi Station Print is the function to enable printing from any of the registered MFPs when a job is sent from a client
computer, by adding multiple MFPs as a cooperative device in advance. Up to 10 MFPs can be registered.
Operating with only one equipment unit is possible if the purpose is to use the output setting change function when
printing. You can connect up to 10 MFPs in a group and connect up to 5 groups including a group to which this MFP
belongs: you can add 4 groups for the connection.
 P.91 "Procedure for Multi Station Print"
 P.92 "Procedure for Multi Station Print (Only in One Equipment Unit)"
 P.92 "Checking the Multi Station Print Enabler"
 Procedure for Multi Station Print
When the Multi Station Print function is used, it is necessary to set all MFPs to be connected. There are two methods to
set the 2nd or later MFPs to be connected: by manual means and by copying the settings of the 1st MFP using a clone
file.
Setup
Operation
1 Checking the Multi Station
Print Enabler
2 Enabling user
authentication
3 Enabling the Multi Station
Print function
4 Setting the connection MFP
(1st device/no group
connection)
5 Setting the connection MFP
(2nd or later devices/
groups)
Operation
Operation
1 Performing Multi Station
Print
Description
Check whether the Multi Station Print
Enabler can be used with your MFP.
Enable user authentication.
Enable the Multi Station Print function.  P.74 "Setting up Multi Station
Register the MFP (this equipment)
which is being connected with
TopAccess as the 1st device.
Register the 2nd or later MFPs by
manual means.
When registering the 2nd or later MFPs
by copying the settings for the 1st MFP,
create a clone file and install it in them.
Description
Print a job from the MFP connected by
the network.
Reference
 P.92 "Checking the Multi Station
Print Enabler"
TopAccess Guide "Authentication
settings"
Print"
 P.74 "Setting up Multi Station
Print"
 P.74 "Setting up Multi Station
Print"
 P.78 "Create Clone File settings"
 P.80 "Install Clone File settings"
Reference
Printing Guide "Printing from Another
MFP (Multi Station Print)"
Functional Setups 91