Auto Setup - Toshiba 19DV733G Owner's Manual

Auto setup

Your TV has an automatic installation routine which makes installation easy. When you turn on the TV for the first time, the
automatic installation routine is activated. This routine helps you select the on-screen language, antenna or cable in, country,
energy saving mode, and automatically search for and store all available analogue and digital (DVB) channels.
The automatic station presetting feature is for the TV's built-in tuner only. If you have a device such as a digital decoder (e.g.
Satellite or Digital Terrestrial) connected (see page 83), you need to tune it in separately according to its own instructions.
14
1
Press on the TV control panel or
remote control.
The Auto Installation menu will appear.
/
2
to select Menu Language, and then
Press
/
press to select your preferred language.
3 *
/
to select Ant/Cable In, and then
Press
/
to select between Antenna or Cable
press
for your TV.
Note:
• A DVB-C notice will appear when you switch
Antenna to Cable. Please check if this function
is supported in the place you live, and if the latest
firmware has been installed on your TV (see
DVB-C Notice on page 2 and DVB-C function
notice on page 12).
/
to select Country, and then press
4
Press
/
to select your country.
/
5
to select Energy Saving Mode.
Press
For normal home use, press
Home.
Note:
• The factory default settings of this TV meet the Energy Saving requirements. Enabling
or changing certain features and functionality (e.g. Picture Setting) may increase energy
consumption, possibly beyond the limits required for Energy Saving qualification.
To ensure your TV is operating at optimal energy efficiency, select [Home] mode during
initial activation.
• The corresponding default setting of Picture Preference to [Home] mode is "Standard",
and the corresponding default setting of Picture Preference to [Retail] mode is "Sports".
The Energy Saving Mode will remain the same regardless of the changes made to the
setting of Picture Preference.
• If you want to change the current energy saving mode setting, perform the Reset
procedure (see page 34) and run the auto installation routine to select a different mode.
on the
Auto Installation
Menu Language
Ant/Cable In
Country
Energy Saving Mode
Auto Tuning
Auto Installation
Menu Language
Ant/Cable In
Country
Energy Saving Mode
Auto Tuning
Auto Installation
Menu Language
Ant/Cable In
Country
Energy Saving Mode
Auto Tuning
Auto Installation
/
to select
Menu Language
Ant/Cable In
Country
Energy Saving Mode
Auto Tuning
English
Antenna
Germany
Home
: Adjust
English
Antenna
Germany
Home
: Adjust
English
Antenna
Germany
Home
: Adjust
English
Antenna
Germany
Home
: Adjust