Sleep Timer - Toshiba 19DV733G Owner's Manual

Basic operation
Note:
• In the Basic Service
Information, the name of
channels and services
appears in full not in
abbreviation.
• Depending on the
availability of DVB-C
function, the Basic
Service Information here
may be different from that
shown on your TV.
• Subtitles are displayed on
the channel banner, but
some broadcasts may not
provide this service.
24
(continued)
Information display
In ATV mode:
Press to display the channel number and sleep
timer settings information on the screen. Current
settings for the sound mode, picture size, and
resolution (if in use) are also displayed. The
information will appear for approx. 5 seconds.
In DTV mode:
When you switch channels, a channel banner is displayed for a few seconds. The channel
banner shows information such as current date and time, DTV channel number, station, and
messages from the DTV service providers, etc.
(1) While watching a programme, press
banner will disappear after a set time. You can change how long the channel banner is
displayed (see page 46 for details).
Service name
Service no.
Duration bar
Starting/Ending
time of current
programme
Genre
again to display the Basic Service Information screen.
(2) Press
You can verify the signal strength and quality of the selected service here. If necessary,
adjust the direction of antenna to obtain the maximum signal strength.
A short event description of an event can also be viewed here. For an extended description
of an event, you can view it in the EPG menu (see page 53).
to remove the display of the Basic Service Information.
(3) Press

Sleep timer

Press SLEEP
to set the sleep timer to turn off your TV/DVD after a set length of time. Each
time you press the SLEEP button, the timer setting increases in 10 increments (Off, 0h 10m, 0h
20m, ..., 2h 0m). After the setting is programmed, the display will begin 30 seconds in advance
to remind you that the sleep timer is enabled.
To confirm the sleep timer setting, press SLEEP
few seconds. To cancel the sleep timer, press the SLEEP button repeatedly until Off appears.
to display the channel banner. The channel
Lock status
Basic Service Information
Service Name: 004 bid-up.tv
Service ID: 0001, running
Multiplex: 40C (TSID 03ec, ONID 22f1)
Network: Crystal Place (ID 3402)
Bit Error Level: 5.165 e-02
Signal Quality
Signal Strength
No Event Name
No descreption
ENTER EXIT
and the time remaining will appear for a
Sleep Timer
11
BBC1 1h 40m
NICAM ST
Auto
576i
DVB Teletext available
DVB Subtitle available
Pay TV
Audio mode
Time and
Date
Parental rating
81%
90%
i