Table of Contents
Advertisement
H8DG6/i(-F) Serverboard User's Manual
Clock Speed Information
Clock speed information for memory is displayed under this Northbridge
Chipset Confi rguration page. This information includes Memory CLK, CAS
Latency (Tcl), RAS/CAS Delay (Trcd), Row Precharge Time (Trp), Min Active
RAS (Tras), RAS/RAS Delay (Trrd), Row Cycle (Trc), Read to Precharge
(Trtp), Write Recover Time (Twr) and Memory Type.
NorthBridge Confi guration
OHCI/EHCI HC Device Functions
These settings allow you to either Enable or Disable functions for OHCI or
EHCI bus devices.
USB 2.0 Controller Mode
Use this setting to confi gure the USB 2.0 Controller in either Hi-Speed (480
Mps) or Full Speed (12 Mps) mode. Options include Enabled (Hi-Speed
Mode) or Disabled (Full Speed Mode).
Legacy USB Support
Select "Enabled" to enable the support for USB Legacy. Disable Legacy
support if there are no USB devices installed in the system. "Auto" disabled
Legacy support if no USB devices are connected. The options are Disabled,
Enabled and Auto.
IDE Confi guration
Onboard PCI IDE Controller
This setting allows you to Enable or Disable the PCI IDE controller.
OnChip SATA Channel
This setting allows you to Enable or Disable the OnChip SATA channel.
OnChip SATA Type
Use this setting to set the OnChip SATA type. Options include
Native IDE, RAID, AMD_AHCI and Legacy IDE.
RAID Codebase
This submenu appears when you choose "RAID" from the "OnChip SATA
Type" setting above. This setting allows you to select the codebase for using
your RAID setup. Options are either Adaptec or DotHill.
4-6
Advertisement
Table of Contents
