Table of Contents
Advertisement
Wake-On-LAN
T h e Wa k e - O n - L A N h e a d e r i s
designated JWOL1. See the table on
the right for pin defi nitions. You must
have a LAN card with a Wake-On-LAN
connector and cable to use the Wake-
On-LAN feature.
DOM Power Connector
A power connector for SATA DOM
(Disk_On_Module) is located at JWF1.
Connect the appropriate cable here to
provide power support for your DOM
devices.
LAN1/2 (Ethernet Ports)
Two Gigabit Ethernet ports (designated
LAN1 and LAN2) are located beside
the VGA port. Additionally, for the
H8DG6/i-F serverboards, there is a
dedicated LAN for IPMI on top of the
two rear USB ports. These Ethernet
ports accept RJ45 type cables.
Universal Serial Bus Ports
Two Universal Serial Bus ports (USB
2.0) are located beside the Keyboard
and Mouse PS2 ports (USB0/1). Two
additional Type A ports (USB6/7) are
also included on the motherboard. See
the table on the right for pin defi nitions.
Wake-On-LAN
Pin Defi nitions
Pin# Defi nition
1
2
3
Pin Defi nitions
Pin# Defi nition
1
2
3
LAN Ports (LAN1/2)
Pin Defi nition
Pin# Defi nition
1
P2V5SB
2
TD0+
3
TD0-
4
TD1+
5
TD1-
6
TD2+
7
TD2-
8
TD3+
9
TD3-
Note: NC indicates no connection.
Universal Serial Bus Ports
Pin Defi nitions (USB 0/1,
USB0
Pin#
Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
2-17
Chapter 2: Installation
(JWOL1)
+5V Standby
Ground
Wake-up
DOM PWR
+5V
Ground
Ground
Pin# Defi nition
10
SGND
11
Act LED
12
P3V3SB
13
Link 100 LED
(Yellow, +3V3SB)
14
Link 1000 LED
(Yellow, +3V3SB)
15
Ground
16
Ground
17
Ground
18
Ground
USB6/7)
USB1
Pin#
Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
Advertisement
Table of Contents
