Installation Requirements; Tools And Parts - Whirlpool 27" ELECTRIC WASHER/DRYER Installation Instructions Manual

INSTALLATION REQUIREMENTS

TOOLS AND PARTS

Gather required tools and parts before starting installation.
Tools needed:
Flat-blade screwdriver
Adjustable or open-end
wrench 9/16" (14 mm)
4" min
(102 mm)
Wood block
Tin snips (new vent
installations)
1/4" nut driver
(recommended)
Caulking gun and compound
(new vent installations)
#2 Phillips screwdriver
Level
Ruler or measuring tape
Adjustable wrench that
opens to 1" (25 mm) or
hex-head socket wrench
Wire stripper
Utility knife
Optional tools:
Flashlight
Parts supplied:
NOTE: Remove parts package from the washer basket.
Check that all parts were included.
Front leveling feet with nuts (2) Shipping strap (Not in parts bag.
Drain hose
Bucket
See "Remove Shipping Strap.")
Silver double-wire hose clamp
3