Switching Navigation Operation On And Off - Mercedes-Benz Modular control system Operator's Manual

Introduction Audio
Destination input

Switching navigation operation on and off

P68.20-2110-27
The navigation operation starts by pressing the button
.
The navigation start up screen appears only during the
software loading process.
Note:
The navigation system starts only after a navigation CD
is inserted in the CD slot.
Telephone Navigation
88
After the navigation system is booted the disclaimer
screen appears. If you accept the statements press
Note:
The radio, tape, CD changer or telephone function can
be used while the navigation system is running.
To switch off navigation operation:
Switch to the radio, tape or CD changer mode and the
navigation system will continue to run in the back-
ground. If you switch off the MCS, the navigation and
audio system will also switch off.
Index
S y s t e m s e t t i n g s
.