Battery (Vehicle); Important Safety Notes - Mercedes-Benz GL Operator's Manual

If a tire pressure of 180 kPa (1.8 bar/26 psi)
has been attained after five minutes:
Switch off the tire inflation compressor.
X
Unscrew the filler hose from the valve of
X
the faulty tire.
Stow the tire sealant bottle and the tire
X
inflation compressor.
Pull away immediately.
X
The maximum speed for a tire sealed with
tire sealant is 50 mph (80 km/h). The upper
part of the TIREFIT sticker must be affixed
to the instrument cluster in the driver's
field of vision.
Stop after driving for approximately ten
X
minutes and check the tire pressure with
the tire inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
G WARNING
If the required tire pressure is not reached
after driving for a short period, the tire is too
badly damaged. The tire sealant cannot repair
the tire in this instance. Damaged tires and a
tire pressure that is too low can significantly
impair the vehicle's braking and driving
characteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
i
In cases such as the one mentioned
above, contact an authorized Mercedes-
Benz Center. Or call
1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
Correct the tire pressure if it is still at least
X
130 kPa (1.3 bar/19 psi). See the Tire and
Loading Information placard on the driver's
side B-pillar or the tire pressure table in the
fuel filler flap for values.
To increase the tire pressure: switch on
X
the tire inflation compressor.

Battery (vehicle)

Pressure release button
E
Pressure gauge
F
To reduce the tire pressure: press
X
pressure release button E on the filler
hose.
Stow the tire sealant bottle and the tire
X
inflation compressor.
Drive to the nearest qualified specialist
X
workshop and have the tire changed there.
Have the tire sealant bottle replaced as
X
soon as possible at a qualified specialist
workshop.
Have the tire sealant bottle replaced every
X
four years at a qualified specialist
workshop.
Battery (vehicle)

Important safety notes

Special tools and expert knowledge are
required when working on the battery, e.g.
removal and installing. You should therefore
have all work involving the battery carried out
at a qualified specialist workshop.
391
Z