Camera; Rear View Camera; Sensors - Mercedes-Benz GL Operator's Manual

Care
380
Mirror turn signals
! Only use cleaning agents or cleaning
cloths that are suitable for plastic lenses.
Unsuitable cleaning agents or cleaning
cloths could scratch or damage the plastic
lenses of the mirror turn signals.
Clean the plastic lenses of the mirror turn
X
signals in the exterior mirror housing using
a wet sponge and mild cleaning agent, e.g.
Mercedes-Benz car shampoo or cleaning
cloths.
Cleaning the sensors
! If you clean the sensors with a power
washer, make sure that you keep a
distance of at least 11.8 in (30 cm) between
the vehicle and the power washer nozzle.
Information about the correct distance is
available from the equipment
manufacturer.
Clean sensors : of the driving systems
X
with water, car shampoo and a soft cloth.
Cleaning the rear view camera
! Do not clean the camera lens and the area
around the rear view camera with a power
washer.
Use clear water and a soft cloth to clean
X
camera lens :.
Cleaning the 360° camera
! Do not clean the camera lens and the area
around the 360° camera with a power
washer.360
Make sure that the vehicle is stationary and
X
that the SmartKey is in position 2 in the
ignition lock.
To open the cover of the 360° camera:
X
with COMAND activated, press the W
button.
Select System System by turning cVd the
X
COMAND controller and press W to
confirm.
Select 360° Camera 360° Camera
X
confirm.
Select Open Camera Cover Open Camera Cover
X
with W.
The cover of the 360° camera opens.
To clean the 360° camera: clean camera
X
lens : with clean water and a soft cloth.
and press W to
and confirm