Dispensing Hot Water; Making Drinks Using A Profile; After Making Drinks - Miele Built-in coffee machine Operating And Installation Instructions

Making drinks with milk
These drinks are in the drinks menu.
^ Place a suitable container
underneath the central spout.
^ Swipe the display until the drink you
want appears and then touch this.
The coffee selected will be dispensed.

Dispensing hot water

,
Danger of burning and scalding
on the hot water spout. The water
dipsensed is very hot.
Please note that the water dispensed
is not hot enough for making tea.
The hot water option is in the drinks
menu.
^ Place a suitable container
underneath the hot water spout.
^ Swipe the display until "Hot water"
appears and then touch this.
Hot water is dispensed into the
container under the spout.
To cancel preparation:
^ Touch "Cancel" or "Stop".
Preparation will be cancelled.

Making drinks using a profile

If you have set the machine up for a
specific user profile (see "Profiles") you
can select this before you make a drink.
^ Touch "Profile" .
^ Swipe the display until "Select profile"
appears and then touch this.
^ Touch the profile you want.
The profile name will appear in the
display to show that a profile has been
selected.
You can now make the drink you want.

After making drinks

If you have made a drink with milk, the
following message appears in the
display after a while "Start rinse cycle"
^ Touch "OK".
The milk pipework will now be rinsed
through.
Even if you do not confirm the
message with "OK", the coffee
machine will rinse the milk pipework
after a few minutes automatically.
Making drinks
33