Filling The Water Container - Miele Built-in coffee machine Operating And Installation Instructions

,
Change the water every day to
prevent a build-up of bacteria.
If the coffee machine is plumbed into
the mains drinking water supply, the
water container will fill automatically as
soon as the machine is switched on.
The inlet device in the lid ensures that
the water is taken in slowly.
If the coffee machine has not been
used to make any drinks for a long
time, the water which is left in the
system can impair the taste of the
coffee. Discard the first full container
of water.
You can also fill the container manually
if you are not using the plumbed in
water supply.
If filling the water container
manually:
Only use fresh, cold tap water.
Hot water or other liquids could
damage the coffee machine.
Do not use mineral water. Mineral
water willl cause serious limescale
deposits to build up in your machine
and damage it.

Filling the water container

^ Open the front of the coffee machine.
^ Pull the water container forwards to
remove it.
^ Take off the lid and fill the water
container with fresh, cold tap water
up to the "max." mark.
^ Push the water container into the
machine until it clicks into place.
If the water container protrudes
slighlty or is a little high, check
whether the surface that the water
container sits on is dirty. If the water
container is not positioned correctly,
the outlet valve will not connect
properly and could leak. Clean the
surface, if necessary.
25