Interior And Machine Front; Brew Unit; Removing And Cleaning The Brew Unit By Hand - Miele Built-in coffee machine Operating And Installation Instructions

Cleaning and care

Interior and machine front

^ First take out all removable parts and
then clean the interior and the
machine front with a mild solution of
hot water and washing-up liquid.
Tip: Use your vacuum cleaner to
remove dry coffee grounds.
A small drip catcher is located inside
the front of the machine at the bottom.
^ Remove the drip catcher and clean it
in the dishwasher by hand using hot
water and a little washing-up liquid.
After cleaning, remember to replace
the drip catcher in the coffee
machine.
64

Brew unit

Clean the brew unit by hand only
using hot water. Do not use
washing-up liquid or any other
cleaning agent.
The moving parts of the brew unit
are lubricated. Washing-up liquid or
cleaning agent will damage the
brew unit.
Clean the brew unit once a week.
Removing and cleaning the brew unit
by hand
The brew unit can be removed for
cleaning. To do this:
^ Open the front of the machine.
^ Remove the water container, waste
container and the coffee chute cover.
^ Press the button under the handle of
the brew unit a and, whilst doing so,
turn the handle clockwise b.
^ Press the catch in front of the brew
unit c downwards, and pull the brew
unit out carefully.