Making drinks
Place the tea filter or tea bag into the
tea cup.
Place the tea cup under the central
spout.
Touch .
Select the type of tea you would like.
Confirm with OK.
Hot water will be dispensed into the
cup.
If the
|
TeaTimer
Automatic
been selected, the minute minder for
the brewing time will start running once
the water has been dispensed.
Alternatively, you can also start
the
TeaTimer
function manually at this
point.
Remove the tea filter or tea bag when
the desired brewing time has
elapsed.
Starting the TeaTimer manually
Prepare a cup of tea.
TeaTimer
appears in the display as soon
as the water has been dispensed.
Touch OK.
The editor will open with a suggested
time.
Change the brewing time if required.
Confirm with OK.
After the brewing time has elapsed, a
buzzer will sound and the symbol will
flash.
Remove the tea filter or tea bag when
the desired brewing time has
elapsed.
34
setting has
Teapot
The
Teapot
function allows you to make
a large quantity of tea (maximum
of 1 litre). The type of tea selected
determines the preset temperature.
The drinks menu is displayed.
Tip: Make sure that the water container
has enough water inside it before
starting the
Teapot
Place a sufficiently large container
under the central spout.
Touch the drinks sensor.
Select
Teapot
.
Select the type of tea and number of
cups you want (3 to 8).
Cancelling a drink
Touch the sensor.
Dispensing warm or hot water
You can choose between the following
options:
- Hot water at approx. 90 °C
- Warm water at approx. 65 °C
The drinks menu is displayed.
Place a suitable container underneath
the central spout.
Touch the sensor.
Choose between warm or hot water.
Confirm with OK.
Dispensing will start.
function.