Hitachi VT-MX211A Owner's Manual page 31

PLAYBACK
NOISE CANCEL (in the Still mode)
This feature allows you to reposition or reduce the noise lines of a still picture.
Press PAUSE button repeatedly so that the noise lines change position on the screen
and you can see the picture in its entirety without distracting noise lines.
NOTE: This feature can be activated ONLY when you use a tape recorded in the SLP
mode.
VERTICAL HOLD CONTROL
When the picture begins to vibrate vertically, stabilize the picture by pressing CHANNEL
or button in the Still mode.
NOTES:
• If there are video noise lines on the screen, reposition or reduce them. Refer to "NOISE
CANCEL".
• When the picture is distorted or rolling vertically, adjust the vertical hold control on your
TV.
• Some latest TV's do not have a user adjustable vertical hold.
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically (Digital TRacking function) when you
start playback "DTR" appears on the display.
• NOTE: The following function is controlled only by the buttons on the VCR.
When playing pre-recorded tapes or tapes recorded on units other than your own, noise
lines (black and white streaks) may appear on the playback picture. If this occurs, you can
adjust the tracking control manually by pressing TRACKING
streaks disappear. To return to the DTR function, stop the tape once and start playback
again.
AUTO REWIND
When the end of a tape is reached during recording, playback, or fast-forward, the tape
will automatically rewind to the beginning. After that, the VCR will eject the tape and turn
itself to off.
or button until the
31