To Operate The Cable Box Once The Remote Is Programmed For It - Hitachi VT-MX211A Owner's Manual

CONTROLLING YOUR TV WITH THE VCR'S REMOTE
1 Program the remote control
Hold down the CATV button and press the number of your brand of cable box (shown in
the chart).
NOTE: If that button combination does not work, or if your brand is not on the chart, just go
through all the button combinations until you find the one that works best.
Cable Converters Press CATV and This Number
Jerrold 1
Jerrold 2
Jerrold 3
Hamlin
Zenith
Scientific Atlanta
Pioneer
Philips
TO OPERATE THE CABLE BOX ONCE THE REMOTE IS
PROGRAMMED FOR IT.
1 Press CATV and then the button of the function you want.
2 Press VCR button to operate your VCR with the remote again.
1
2
3
4
5
6
7
8
51