D-Link AirPlus DI-614+ User Manual page 28

Remote Management
Remote Management allows the DI-614+ to be configured from the Internet
by a web browser. A username and password is still required to access the
Web-Management interface. In general, only a member of your network can
browse the built-in web pages to perform "Administrator" tasks. This feature
enables you to perform "Administrator" tasks from the remote (Internet) host.
IP Address: Internet IP address of the computer that has access to the
Broadband Router. It is not recommended that you set the IP address to
* (star), because this allows any Internet IP address to access the
Broadband Router, which could result in a loss of security for your
network. If you elect to enable Remote Management, enter the IP Address
of your remote location.
Port: Select the port number used to access the Broadband Router.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the
Broadband Router and 8080 is the port used for the Web-Management
interface.
TOOLS > TIME
Time
The system time is the time
used by the DI-614+ for
scheduling services. You can
manually set the time or
connect to a NTP (Network
Time Protocol) server. If an
NTP server is set, you will
only need to set the time
zone. If you manually set the
time, you may also set
Daylight Saving dates and
the system time will automatically adjust on those dates.
TOOLS > SYSTEM
System Settings
The current system
settings can be saved as
a file onto the local hard
drive. The saved file or
any other saved setting
file can be loaded back
on the Broadband
Router. To reload a
system settings file, click
on Browse to browse the
28