D-Link AirPlus DI-614+ User Manual page 37

Troubleshooting
4. Resetting the DI-614+ to Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to Reset the DI-614+ to the factory default settings.
Remember that D-Link AirPlus products network together, out of the box,
at the factory default settings.
To hard-reset the D-Link AirPlus DI-614+ to Factory Default Settings, please
do the following:
• Leave the device powered on, do not disconnect the power
• Press the reset button and hold (use a paper clip)
• Keep the button pressed about 10 seconds
• Release the button
The DI-614+ will then automatically reboot itself.