Maytag Wall Oven Manual page 7

5. PushENTER buttonto enter starttime. TochangeSTOPTIME:
TheindicatorwordsSTOPTiMEwill appear in 1. Holdin STOPTIMEbuttonuntilthe wordsSTOP
DisplayWindow as a reminderto setSTOP TIMEappear in DisplayWindow.
TIME. 2. TurnSET dial to desiredtime.
6. TurnSETdial to timeyou want food to stop
cooking. 3. PushENTER button to enter stop time.
EXAMPLE: If start time isone o'clock and the ToCancelfunctionprogrammed: PushCANCEL
roast needsto cook for 3 hours, the stop time buttontwice to cancel function,during programmed
would be four o'clock, time or after time has expired.
NOTE: After clock-controlledbaking, turn OVEN
DISPLCY SETknob to OFFpositionand OVEN TEMP
knob completelycounterclockwise.
START TIME STOP TIME
NOTE: Sincefood continues to cook if left" in the
7. Push ENTER buttonto enterstoptime. oven,it is suggested thatthe clockcontrols
be usedprimarilyto startthe ovenwhen no
Theindicator word AUTO will blink in the
one is in the kitchen.Provisionsshould be
DisplayWindow. When starttime is reached, made to have the food removedas soon as
the indicator word AUTO will remain in Display the signal has sounded.
Window. TheOVEN indicator light will glow
until the desiredtemperatureis reached. NOTE: If more than 7 secondselapsesbetween
When stoptime is reached,the oven shutsoff holding in START TIMEbuttonor STOP
and the indicator word AUTO will begin to blink TIMEbutton and turning the SETdial, the
and timer will beep. Beepingwill continueevery DisplayWindow will automaticallyreturn
10 secondsfor 15 minutesunlesstheCANCEL to on-going program.
button is pushedtwice.
NOTE: If more than 1 minuteelapsesbetween
TocheckSTART T IMEbeforecookingbegins:Hold turning SET dial to a newtime and
in START TIMEbuttonuntilthe wordsSTART TIME enteringnewSTART TIMEand STOP
appear in theDisplayWindow.Thestarttimewill TIME,the entireprogram will be
be displayedbriefly,thenDisplayWindow will cancelled and Displaywill returnto time
return to time of day. of day clock.
TochangeSTART T IMEbefore cookingbegins:
1. Hold in START TIMEbutton until the words
START TIMEappear in the DisplayWindow.
2. TurnSETdial to desiredtime.
3. PushENTER button twice to enternew starttime
and stoptime previouslyprogrammed.
TocheckSTOPTIME:H0(d in STOPTIMEbutton until
thewords STOPTIMEappear in the Display
Window. Thestoptime will be displayed briefly,
thenthe DisplayWindow will returnto on-going
program.
6