Key Digital KD-CATHD500Pro Setup Manual

Key Digital KD-CATHD500Pro Setup Manual

Hdbt/hdmi via single cat6/stp (tx/rx) extenders with edid control, rs-232, ir, hdmi pass-through and ethernet

Advertisement

Quick Links

Rev 0 – May 2013
KD-CATHD500Pro
HDBT/HDMI via Single CAT6/STP (Tx/Rx)
Extenders with EDID Control, RS-232, IR,
Key Digital
®
, led by digital video pioneer Mike Tsinberg,
HDMI Pass-through and Ethernet
develops and manufactures high quality, cutting-edge
technology solutions for virtually all applications where
high quality video imaging is important. Key Digital
®

Setup Guide

is at the forefront of the video industry for Home Theater
Retailers, Custom Installers, System Integrators,
Broadcasters, Manufacturers, and Consumers.
The Experts in Digital Video Technology and Solutions
Key Digital
Systems
::
521 East 3rd Street
::
Mount Vernon, NY 10553
®
Phone
:
914.667.9700
Fax
:
914.668.8666
Web
:
www.keydigital.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KD-CATHD500Pro and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Key Digital KD-CATHD500Pro

  • Page 1: Setup Guide

    , led by digital video pioneer Mike Tsinberg, HDMI Pass-through and Ethernet develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high quality video imaging is important. Key Digital ® Setup Guide is at the forefront of the video industry for Home Theater Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers.
  • Page 2: Table Of Contents

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KD-CATHD500Pro carries IR and RS-232 for controlling remotely located equipment.
  • Page 3: Connections

    Connections Additionally you may connect a 10/100 Ethernet LAN cable to the “TCP/IP” port ➔ Before making any connections, power off your source and display devices. Tx balun: Using a short HDMI cable, connect your source device to the HDMI port labeled ➔...
  • Page 4: Extending Ethernet, Ir And Rs-232 Control

    Up to 300’ – with 3rd Party CAT6/STP You can use TIA 568B standards for termination. Ethernet LAN rS-232 Display ➔ » You can use the KD-CATHD500Pro to send RS-232 commands for controlling HDMI CAT6/STP remote equipment. KD-CATHD500Pro IR Emitter »...
  • Page 5: Settings

    All resolutions up to 1080p, 1920x1200, 3D up to 400ft The possible EDID settings can range from ‘0’ to ‘9’ (‘0’ is the default). KD-CATHD500Pro w/ Third-Party CAT6/STP cabling: All resolutions up to ➔ 1080p, 1920x1200, 3D up to 300ft...
  • Page 6: Specifications

    HDCP Licensing: Fully licensed and compatible with all HDMI ® ➔ and HDCP techologies KD-CATHD500Pro Link and Range: 1080p/60, 1920x1200, 1080i/60, 720p, ➔ 1080p/24; up to 400ft when used with KD-CAT6STP1X cabling, 300ft when used with third-party CAT6/STP cabling.
  • Page 7: Important Product Warnings

    7. Do not install near any heat sources such as radiators, heat registers, stoves, or repairs and Warranty Service other apparatus (including amplifiers) that produce heat. Should your product require warranty service or repair, please obtain a Key Digital ® 8. Only use attachments/accessories specified by the manufacturer.
  • Page 8 Installation Notes Installation Notes...

Table of Contents