Hdbaset/hdmi via single cat5e/6 (tx+rx set) extenders, support ultra hd/4k, edid control, hot plug control, full buffer system, ir sensor, up/down ir & rs-232
power over hdbaset/hdmi via single cat5e/6 (tx+rx set) extenders, support ultra hd/4k, edid con (12 pages)
Hdbaset/hdmi via single cat5e/6 (tx + rx set) extenders,
support ultra hd/4k, edid control, hot plug control,
long range mode, full buffer system, hdmi pass-through, ethernet, ir sensor, up/down ir & rs-232 (12 pages)
Hdbaset/hdmi via single cat5e/6 tx+rx set extenders with audio de-embedding, edid control, hot plug control, long range mode, full buffer system, hdmi pass-through, ethernet, ir sensor, up/down ir & rs-232, support ultra hd/4k & hdcp2.2 (15 pages)
, led by digital video pioneer Mike Tsinberg, ® develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high-end video and control are important. Key Digital ® is at the forefront of the video industry for Home Theater Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers.
KD-X222/KD-X222PO units Full Buffer System : Manages TMDS re-clocking / signal re-generation, Step 2: Begin with the KD-X222/KD-X222PO Tx/Rx units and all ™ ➔ HDCP authentication with source & display, EDID Control handshake,...
After all the connections are made, connect power to the Tx and Rx ➔ Refer to the “Extending IR or RS-232 Control” and the “RS-232 Commands” (KD-X222 only) using the included power supplies and then power up section for more information. your source and display equipment.
HDBaseT (extension over CAT5e/6) Switch (sold separately) Shield Ground RS-232 Cabling RS-232 cables are available through Key Digital and other wire suppliers, and can also be fabricated by skilled technicians. Key Digital RS-232 Cable Pinout Charts Model Wire DB9 Pin Signal KD-3.5FDB96...
Page 7
It accepts a maximum IR burst frequency of 55kHz. IR Sensor / IN Pinout Wire Signal Only the included IR sensors are compatible with the KD-X222/ KD-X222PO. Third-party IR Sensors may not be compatible. 5V Power The included IR Sensor.
EDID Control desired setting for IR Out (RS-232) ports, RS-232 Mode, EDID authentication is provided from the KD-X222/ KD-X222PO Tx unit to the and Hot Plug Detection control. connected input / source device. The EDID file (AKA “handshake”) is selected using The Control Rotary is located on the Tx unit.
In those cases, fix the Control rotary to any Forced HPD setting. with the KD-X222PO Rx unit Range and Resolution: HDMI Link (HDMI Input/Output): Distance performance is significantly increased when using Key Digital » Color: Blue KD-CAT6STP1X Super CAT6/STP Cabling.
Commands are not case-sensitive. Spaces shown below may be excluded. Carriage return and line feed is required at the end of each string. Status Command: Tx unit Phoenix connector IR Sensor KD-X222 > STA ------------------------------------------------------------------------- IR In Signal White (IR sensor) Key Digital Systems STATUS...
------------------------------------------------------------------------- Enclosure: Black Metal ➔ Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs ➔ KD-X222 Power: (2) KD-PS5V2ASC, 5V/2A, 100-240VAC, 50-60Hz, ➔ Interchangeable head with screw-in connector KD-X222PO Power (Tx Only): KD-PS12V2ASC, 12V/2A, 100-240VAC, ➔ 50-60Hz, Interchangeable head with screw-in connector Accessories: (2) Mounting Brackets, (1) IR Emitter, (1) IR Sensor ➔...
All Key Digital products are built to high manufacturing standards and should ® » Exposure to rain or moisture provide years of trouble-free operation. They are backed by a Key Digital Limited 3 Year Product Warranty Policy. http://www.keydigital.com/warranty.htm Power Supply Use:...
Need help?
Do you have a question about the KD-X222 and is the answer not in the manual?
Questions and answers