Table of Contents
Advertisement
AUTOMATIC POWER OFF
The device will automatically switches off after about 1 minute.
However, to conserve battery power, press the
finished to turn the unit off.
ERROR MESSAGES
Description
Display
Err 1
Deflation period too long
Err 2, 8,
Incorrect measurement
12, 13,
14, 15
Cuff is not fastened
Err 3
Vigorous motion is being
Err 4
detected during
measurement
Err 5,
Measurement error
6, 7
Calibration error
Err 9,
10,11
button when
Remedies
Do not move during deflation.
Check whether the unit is worn
well on wrist and measure
again.
Check if battery power is low
otherwise change all batteries
and measure again.
Fasten the cuff and measure
again.
Stay calm and easy then
measure again.
Stay calm and easy then
measure again.
Retry again, Return the unit to
the manufacturer for repairing
if same symptom persists.
( R e p a i r i n g / R e p l a c e m e n t
charge free only if under the
valid warranty.
Proof of
purchase is needed).
MAINTENANCE, CLEANING AND CARE
When handled properly, this unit is engineered to give years of
satisfactory service.
Here are a few product care instructions:
- When not in use, store the unit in the protective plastic container
provided with your purchase.
- Do not immerse the unit in water. If the unit comes in contact with
water, dry it immediately with a soft lint-free cloth.
- The unit casing and the cuff may be carefully cleaned with a soft,
slightly moistened cloth. Do not use abrasive or corrosive
cleaning agents which might damage the device.
- Remove the batteries if the device will not be used for long
periods of time.
- When replacing batteries, use new batteries as specified in this
instruction manual. Do not mix new and old batteries.
- Do not place objects on the cuff, or the main unit.
- Technical inspection of the unit should be carried out after 2
years of use. For this purpose, please contact your retailer for
detail.
- Do not subject the unit to excessive force, shock, dust, temperature,
or humidity. Such treatment may result in malfunction, a shorter
electronic life span, damaged batteries or distorted parts.
- Do not tamper with the unit's internal components. Doing so will
terminate the unit's warranty and may cause damage. The unit
contains no user-serviceable parts.
- If, one day, the device should not be required for further use,
protect the environment by bringing it to your dealer or designated
collection point for proper disposal.
12
Hide quick links:
Advertisement
Table of Contents
