Table of Contents
Advertisement
Note:
1. Press and hold the [
]button for 2 seconds, the display will flash
12h or 24h.
2. Press the [
] button to select either 12 hour or 24 hour display.
3. Press the [
] button to accept
4. The hour digits will flash. Press the [
5. Press the [
] button to accept
6. The minutes digits will flash. Press the [
minutes
7. Press the [
] button to accept
8. Similarly, set the display for year, day / month or month / day
setting, month and date.
9. Press the [
] button to exit time date setting.
The device will automatically
However, to conserve battery power, press the
finished to turn the unit off.
] button to set the hour
] button to set the
12
AUTOMATIC POWER OFF
ERROR MESSAGES
Description
Display
Err 1
Deflation period too long
Err 2, 8,
Incorrect measurement
12, 13,
14, 15
Cuff is not fastened
Err 3
Vigorous motion is being
Err 4
detected during
measurement
Err 5,
Measurement error
6, 7
Calibration error
Err 9,
10,11
switch
off after about 1 minute.
button when
Remedies
Do not move during deflation.
Check whether the unit is worn
well on wrist and measure
again.
Check if battery power is low.
Change all batteries and
measure again.
Fasten the cuff and measure
again.
Stay calm and easy then
measure again.
Stay calm and easy then
measure again.
Retry again,
return
the unit to
the manufacturer for repairing
if same symptom persists.
( R e p a i r i n g / R e p l a c e m e n t
charge free only if under the
valid warranty.
Proof of
purchase is needed).
Hide quick links:
Advertisement
Table of Contents
