Table of Contents
Advertisement
DISPLAY-SYMBOL DESCRIPTION
Symbol
Description
Memory Mark
Weak Battery
Inflating Mark
Air releasing
Pulse Mark
Explanation
Appears when
measurement value is
recalled from memory
Appears when batteries
should be replaced
Appears when inflating
until pressure is enough
Appears when cuff air is
exhausting
Shows the pulse rate per
minute
INSTALLING BATTERIES
1. Slide battery cover off.
2. Install battery first. Ensure
correct polarity.
Battery Type:
2 Alkaline LR03 (AAA)size
3. Replace the cover.
Replace the batteries if:
1. the weak battery mark appears
in the display
2. nothing appears in the display
when the power is switched on.
If not disposed of properly, batteries can be harmful.
Protect the environment by taking exhausted batteries
to authorized disposal stations.
Note:
To extend battery life, when battery power is low,
replace all the batteries.
8
Hide quick links:
Advertisement
Table of Contents
