Checking The Stereoscopic Effect - JVC IF-2D3D1 Instructions Manual

Functions for camera adjustment –
The unit can divide the screen and display the left side of the left image and the right side of the right. This is
useful for checking the left and right images.
Example of mismatch of iris
adjustment
Setting
1
Press ADJUST MODE and select SPLIT MODE using
2
Adjust the position of the dividing line using
Checking the stereoscopic effect –
You can select a monitoring method other than normal 3D display when checking the stereoscopic effect of a 3D
image. Anaglyph (the left and right images are colored differently) and LR sequential (the left and right images are
displayed alternately) are available for checking.
L R L R
0.5 sec.
0.5 sec.
Setting
1
Press ADJUST MODE and select a setting value using
12
EN
Image from HD/SD SDI IN 1(L)
Example of vertical shift of
shooting position
. (–60 - 0 - +60)
Anaglyph
Images for the left and right eyes are colored in red and blue respectively
and displayed on one screen in layers. You can check parallax adjustment by
viewing the gap between the left and right images even on a 2D (conventional)
monitor or without 3D glasses.
LR sequential
Images for the left and right eyes are displayed alternately at 0.5-second
intervals. You can view images in this method on a conventional 2D monitor
but it requires training to see them as 3D images.
0.5 sec.
0.5 sec.
Split
Image from HD/SD SDI IN 2(R)
.
monitoring method
●
Be aware that it is difficult to see the colors and stereoscopic effect
correctly in anaglyphic representation.
.
Example of mismatch of white
balance adjustment