IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid clean- ers or aerosol cleaners.
● Do not touch the edge of the metal frame, as there is the risk of injury. ● Users must not attach the SA-K51U themselves because there is the risk of a burn from an electric shock. Request your nearest JVC Service Center to perform the work. There will be a charge for the work.
First, set the ID of the hard disk drive to “SLAVE.” Refer to the instructions on how to set the ID shown on the top (side with the model-name label affixed) of the hard disk drive. Fix the SA-K51U in place by inserting the screws (silver) into the four screw holes of the stand and tightening them.
How to Mount The following describes how to operate the front panel of the VR-510U to mount the SA- K51U. Insert the plug into the plug socket and switch on the power switch of the VR-510U. The MOUNT ERROR message is displayed on the monitor. 3 - 1 0 - 0 2 S U N 1 8 : 0 3 : 3 8 A L - - - - - - - - - - %...
How to Verify Mounting The following describes how to operate the front panel of the VR-510U to verify that the SA- K51U is mounted. Press the MENU button. The MENU screen is displayed. [ M E N U ] J . D I R · C L O C K S E T O N S C R E E N / F .