Table of Contents
Advertisement
Advanced Operations (Cable Box Hookups)
6. Take the coaxial cable that is still connected
to the television
and hook it to the
output of the VCR.
Some Channels
Scrambled
Cable Box Hookup
This setup lets you switch between the two configurations
in Options
1 and 2.
Check all the TV and VCR functions.
If you still don't get the functions
you want,
proceed with Option 4.
Option
4
If none of the preceding
hookups work, check with your cable company.
You may
need to purchase
a video switching
system from your local electronics
or video
retailer. This will easily handle most hookup problems.
Remote Control of the Cable Converter
If you have a cable converter,
you will probably
want to program
your VCR's
remote control so you can easily change channels.
The process is the same as
for programming
the remote to operate
your TV. For additional
details, see page
44.
Hold down the CATV button and press the number of your brand of cable box
(shown in the chart).
If that button combination
does not work, or if your brand is not on the chart, just
go through all the button combinations
until you find the one that works best.
Cable Converters
Jerrold 1
Press CATV and This Number
1
Jerrold 2
Jerrold 3
3
Hamlin
4
Zenith
5
Scientific
Atlanta
6
Pioneer
7
Philips
To operate the cable box once the remote is programmed
for it:
Press CATV and then the button of the function
you want.
Press VCR to operate your VCR with the remote again.
42
Advertisement
Table of Contents
